Share your SWITCH v2.0 Experience

*much new question, study vrrp hsrp glb
D D *vss -stack, hasrp -vrrp
lab >VTP,hsrp, *********************spt lacp not configuretation el port channel ,this you can

*Uses multicast address of 224.0.0.102
*Requiere a unique IP address to use a the virtual IP address
*Uses a virtual MAC address that Begin witch 0000.0C9F.F000
—-VRRP—-
*Track the reachability of an IP address
*Uses IP protocol 112
*Uses the physical IP address of the interface as the virtual address

guys… I don’t understand, is this the premium dump?

https://www.certprepare.com/switch-questions-and-answers

???

@Eledu The Premium Dump is valid and the free dump to!, and all Labs are the actuals of real test.
good luck to everyone!

Dear All, I will share the dumps with u soon right now having issue with Internet please do wait

Guys? New Updated Questions Part 6,7,8 & composite quizzes are enough?

@saji where did you find these questions?

There are various reasons for the interface to go into errdisable. The reason can be:

Duplex mismatch
Port channel misconfiguration
BPDU guard violation
UniDirectional Link Detection (UDLD) condition
Late-collision detection
Link-flap detection
Security violation
Port Aggregation Protocol (PAgP) flap
Layer 2 Tunneling Protocol (L2TP) guard
DHCP snooping rate-limit
Incorrect GBIC / Small Form-Factor Pluggable (SFP) module or cable
Address Resolution Protocol (ARP) inspection
Inline power

and also somewhere else it says:
Possible causes of these types of errors include:
A cable that is out of specification (either too long, the wrong type, or defective)
A bad network interface card (NIC) card (with physical problems or driver problems)
A port duplex misconfiguration

so except B, both A,C seem to be correct. D can also be correct if there is port security sticky enabled but this is not specified, so I would not assume this

Here u go

https://drive.google.com/open?id=1ruhBuR0pjbey5WKn8ZeuKgyonxHB-JOJ

Answer: BC
https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/69980-errdisable-recovery.html
“There are various reasons for the interface to go into errdisable. The reason can be:
… Security violation … Late-collision detection …”

Hi I have Passed my ROUTE on Monday, June 19, 2017, am I still eligible to complete my SWITCH & TSHOOT before Feb 23rd to attain final certificate?

12. What types of SDM templates you can use in switch? (Choose three)
A. Access B. Default C. Routing D. VLANs E. ? F. ?

4 answers are correct, what do you do?

Congratulation Mr Saji for passing the exam. Could you please share the dumps at rahimullah843(at)gmail(dot)com. I have exam next week .Thanks in advance.

@ cheekie, georoot.

I had the answers BOLD in word document, when I pasted on the this forum it got lost the Format.

I was frequent visitor & premium member. someone posted here. two – three weeks ago. not sure whether some where in the same site.
I remember one New or re-worded question…

there is exhibit of ” (conft)# spanning-tree portfast defauit ” is being issued.

———–
@georoot..
12. What types of SDM templates you can use in switch? (Choose three)
A. Access B. Default C. Routing D. VLANs E. ? F. ?

A,B&C are correct. VLAN is correct but it in not VLANssss

Question is what would you configure to stop receiving the BPDU.
A. spanning-tree portfast bpdufilter default
B. spanning-tree portfast bpduguard default..
C. –not correct choice & can’t remember
D.–not correct choice & can’t remember

I had to chose between A & B. I think i chose filter. I’m not sure. can’t remember. But if you know what is bpdufilter & bpduguard and what are the ways you can configure it. it is easy

ip helper august is the last?

Just finished the exam, premium member is valid.
I have got 2-3 new questions.
Lab : lacp & stp, hsrp, vtp v3.

If someone have ccnp route dump please share it.

Where do I get the IP Helper Aug? I’m a Premium member and doing exam in two weeks

in real exam(LACP with STP Sim), one of the switch did not accept the “switchport trunk encapsulation dot1q”.
I tried couple of times then i ignored it.
everything came as we expected.
boom in one shot ether-channel came & ping was successful.
requirement to configure every thing on physical interface.

@Saji
the validation is the ping? .. the events of vlan native 99 in fa0 / 4 would come out, so copy individually to fa0 / 4.
when placed in range does not accept.

after doing it manually in fa0 / 3 and fa0 / 4 there was no error and if it answered ping is it ok?

@ Anonymous,
I used range command, I did not tried on individual physical link (fa0/3 & fa0/4). i used the show cdp neighbor fa0/– details find the ip . and ping worked on Switch B.

Hello Guys…i need help with the new CCNP materials (ENCOR)
Please advise where i can get that

HI everyone
passed my exam yesterday labs were lacp & stp, hsrp, vtp v3 15 to 20 new questions.
not updated on even premier member site.
good luck

@CCNP@, what you are saying does not fall in line with everyone else, perhaps they have been reworded and not new questions.

@dirtflake you are still eligible but before Feb 23 please.

@Latest ENCOR – In regards to the materials, I’ve passed ROUTE & TSHOOT by using materials from 9TUT & the route website (premium materials) but not sure how it will work out for SWITCH but I can say in a few hours – Testing in 3 hours

@Waseem @Saji, Thanks guys for the info. I will focus on the 3 Labs.

How about the Qs? Shall I need to familiarize Qs under “SWITCH 300-115” or Will I just focus on the New Updated Questions Part 6, 7, 8 and SWITCHv2 – Composite Quizzes?

@Waseem @Saji, Thanks guys for the info. I will focus on the 3 Labs.

How about the Qs? Shall I need to familiarize Qs under “SWITCH 300-115” or Will I just focus on the New Updated Questions Part 6, 7, 8 and SWITCHv2 – Composite Quizzes?

Which two statements about VRRP are true?
A-It supports clear-text authentication only
B-Preemption is not Supported
C- It uses a share Virtual IP to support default gateway redundancy
D- It requires each device in the group to participate in the same dynamic routing protocol
E- It can use a single virtual address to provide default gateway redundancy

CD OR CE?

Guys, I failed! Got 3 labs (LACP, HSRP, VTP) and around 10-12 new questions. These questions were revolved around port priority for LACP, CDP advertisement qs, HSRP. It could be my mistake only because I failed to study everything except Part6-8 & composite quizzes. Good luck guys. Waiting to save money to write again before Feb 23 lol!

A network engineer is trying to prevent users from connecting unauthorized equipment to a production network.
Which option can be implemented campus-wide to satisfy this requirement?
A. IP Source Guard
B. switch port block
C. Uplink fast
D. private VLANs
E. BPDU Guard
Answer: E

A network engineer is trying to prevent users from connecting unauthorized equipment to a production network. Which option can be campus-wide to satisfy this requirement?
A. IP Source Guard
B. switch port block
C. Uplink fast
D. private VLANs
E. BPDU Guard
Answer: A

Is correct???

both questions are different for a word that is implemented

1. A
2. A