Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Guys…one from me if you don’t mind..
Which two statements about default FHRP behavior are true? (Choose two.)
A . A standby HSRP router becomes active if it has a higher priority than the priority of the current active router
B . A VRRP backup virtual router becomes the master router if its priority is higher than the priority of the current master router.
C . Unless specifically Configured, the priority of an HSRP router is 200.
D . A backup GLBP active virtual gateway can become active only if the current active virtual gateway fails.
E . Preemption is enabled by default
A, B and D seem correct?
C and E both definitely wrong.
@Boxing_Surfer
I agree with you… D and F
“In 802.1Q, the trunking device inserts a 4-byte tag into the original frame and recomputes the frame check sequence (FCS) before the device sends the frame over the trunk link”
@Switchy
I dont think D is true
A backup GLBP AVG can become active if a higher priority AVG become active and preemption is enabled. It doesnt required the active one to fail
This is config is correct????
SWITCH A
vlan 21
name Marketing
vlan 22
name Sales
vlan 23
name Engineering
spanning-tree vlan 11-13,21-23 root primary
interface range fa0/3 – 4
shutdown
no switchport mode access
no switchport access vlan 98
channel-group 1 mode active
channel-protocol lacp
exit
interface port-channel 1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk vlan native 99
switchport trunk vlan allowed 1,21-23
no shutdown
exit
—————————————————————————————
SWITCH B
vlan 21
name Marketing
vlan 22
name Sales
vlan 23
name Engineering
vlan 11
name ADM
vlan 12
name BDM
vlan 13
name CDM
vlan 99
name TrunkNative
interface range fa0/9 – 10
switchport mode access
switchport access vlan 21
spanning-tree porfast
no shutdown
exit
interface range fa0/13 – 14
switchport mode access
switchport access vlan 22
spanning-tree porfast
no shutdown
exit
interface range fa0/15 – 16
switchport mode access
switchport access vlan 23
spanning-tree porfast
no shutdown
exit
interface vlan 1
ip address 192.168.1.11 255.255.255.0
no shutdown
exit
ip default-gateway 192.168.1.1
vtp mode transparent
spanning-tree mode rapid-pvst
interface range fa0/3 – 4
shutdown
channel-group 1 mode passive
channel-protocol lacp
exit
interface port-channel 1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk vlan native 99
switchport trunk vlan allowed 1,21-23
no shutdown
exit
—————————————————————–
SWTICH A
interface range fa0/3 – 4
no shutdown
exit
copy run start
——————————————————————
SWITCH B
interface range fa0/3 – 4
no shutdown
exit
copy run start
@Help me!!!
config looks perfect to me
LACP lab – Doesn’t it apparently say that the configuration needs to be made on the interfaces?
That config is applying on the port channel?
@Switchy
If you configure like this then config should end up on the interfaces as well as the port channel.
I would do it like this.
Yes. But in exam says config only under
The physical interface. You don’t have to do
Anything under Po channel interface
Taking my test really soon what is the TACACS vs RADIUS drag and drop?
@PLEASE HELP ME
Question 7
Drag drop about RADIUS & TACACS+
RADIUS_TACACS.jpg
Answer:
RADIUS:
+ Multi-vendors
+ Encrypts only the password
+ Combines authentication and authorization
+ UDP
TACACS+:
+ Proprietary
+ Separate AAA
+ Encrypts the entire body
+ TCP
Get the premium account to help you pass! Good luck!
I took today and fail. Many new Q’s. Lots of TLV Q’s.
GLTA
@JJ, I am in for the groupbuy. How can we do this?
Sorry to hear that Valdez, do you remember any of the Q’s?
We have one chance to pass now, no time to try again…
LACP TLVs:
System name and description
Port name and description
VLAN name
IP management address
System capabilities (switching, routing, etc.)
MAC/PHY information
MDI power
Link aggregation
@Switchy
there are multiple question around asking for TLVs. I do not think they adding new questions week before exam expires. Most likely person that failing just did not study properly or never saw this question. I came across few PDFs with 900 or 1000 questions. There is no chance to remember everything.
@nyck
There is supposed to be a dump that is only 384 MCQ and they said it is valid. Probably cleaned up. I would like to get my hands on that if anyone knows how. @JJ said there is a groupbuy but not sure how that works.
the TLV ones are particularly annoying. you just have to try to comit them to memory. I wish the cisco exams didnt do this kind of testing – i mean lets face it, knowing the TLV’s doesnt help you become a more proficient network engineer its pointless. This is a reason the CCNP lost so much of its value in recent years
but we have to do what we need to pass the exam…
i have a crib of these (cdv vs llpd) that I will post tomorrow. maybe it will help you as well as me
@boxingSurfer, please post your crib ASAP. I am taking test tomorrow!
my best advice
if you can, do some wireshark captures of LLDP and CDP frames
Look at their contents. compare and contrast them
It helps those of us with visual memory remember how they are laid out
@Help me!!!
Your native vlan command is wrong
It should be
#switchport trunk native vlan 99
interface port-channel 1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk vlan native 99
switchport trunk vlan allowed 1,21-23
no shutdown
Note:- To check your configuration
01. Both switches you check the interface port-channel & VLAN UP typing #show ip interface brief
02.Check both switch ether channel status #show Etherchannel summary
03. Ping 192.168.1.1 from switch B (If you can able to ping the router gateway your configuration correct… )
@Valdez I am sorry to hear that. What LABs was on the test?
If you don’t mind
@boxingSurfer men the best for you. Keep calm and read very well.
spoto website emailed me price.( spoto 384 mcq )it is $150 .
I don’t know if everyone want make a wassap group or something And Share the amount . It will help everyone . Because $150 is too much for few people.
But I just saw it. There description says they bind only one PC with their VCE server. Only one person can use it .
@jj
no guarantee those questions are any different from the ones on this site, and other materials
and no guarantee the answers are more correct
you really want to pay for more questions to study?
i think everything you need is here on this site. lots of questions, lots of wrong answers but good basis for study.
@jj
I am willing to go in on it. But @boxingsurfer is right. But right now, I don’t think it matters, if they have the new TLV questions in there, then I would think its legit.
Hi @jj @mm I will to buy the spoto dump.What do you think about spoto? i dont sure with yhe Q of this site
@mm @jj My email is o d j r f 86 @ out look. com
Hey guys i forwarded the email that they sent me , i believe spoto.net is legit , because i heard from so many people they use for CCIE also. just check the email and you guys decide.
@jj I have the email about dump. Let’s talk by mail
or either it is better to stick with certprepare , because not enough time to jump here and there