Share your SWITCH v2.0 Experience

Guard Root:
+ protect designated port from receiving superior BPDU
+ a better BPDU disables the port as err-disabled
Guard Loop:
+ port self recovery
+ detecting unidirectional switching links

Can anyone confirm this is correct?

3、You are adding new VLANs. VLAN500 and VLAN600 to the topology in such
way that you need to configure SW1 as primary root for VLAN 500 and
secondary for
VLAN 600 and SW2 as primary root for VLAN 600 and secondary for VLAN
500. Which configuration step is valid?
A. Configure VLAN 500 & VLAN 600 on both SW1 & SW2
B. Configure VLAN 500 and VLAN 600 on SW1 only
C. Configure VLAN 500 and VLAN 600 on SW2 only
D. Configure VLAN 500 and VLAN 600 on SW1 ,SW2 and SW4
E. On SW2; configure vtp mode as off and configure VLAN 500 and VLAN 600;

Does anyone know the answer? Some say A and other say B!!!

@ susuet@2632

It is answer A. The questions is worded weird because it assumes you would do extra steps. Since VLAN 500 needs to be root on Sw and VLAN600 root on SW2 they would require the extra configurations on each of the “root primary” command on each switch to make it the root or secondary for the requested VLANS

Pass today, it wasnt easy but I pass… now a few things for all:

forget if you are only studing dumps, if you are you will fail…. you need to study!!!
I only have about 10 questions equal as is to the questions in this site and a another vce dump that I have… the other questions was reformultated questions and anwers, their are not equal to what I have see in the site… so if you dont know the concepts you will fail.
My exam have a lot of dhcp, rspan, aaa, the exam almost was about this… only have one question that for me was new, the other ones was reformulated, with new answers or answers that we need to know the concept to respond.

labs stp/lacp was the same, sim hsrp and vtp the same to… questions equal!!!

44questions, 790 to pass and a score of 8xx (high), it was enought to pass.

thanks all for sharing your time and knowledge, thaks for certprepare too for this amazing site…

see you next time

Good luck everybody

oh and the DND…. I have a DND that it was new, beter, it was reformulated… it was a dnd about hsrp and vrrp
The one of vss/stackwase was diferent to but the answers are easy, is you know the concepts…

Imagine all the dnd about hsrp and vrrp that are here on this site and pick uo answers from one and other answers from another to have the solution…. like I said, if you know the concepts You pass, if you memorize you will be a lot of problems.

A question about stackwise, if you add a new swicth to the stack how te priority is define… samething like that.
Have this questions, But the question was diferent, the answers are this one.
:
In which two cases does packets go through the virtual link? (Choose two)

A. When it is the ingress active router.
B. When it is the egress active router.
C. When it is the ingress standby router.
D. When it is the egress standby router.
E. When the Layer 2 traffic is overflow.

Which two statements about STP path cost are true? (Choose two)

A. The short method uses a 32-bit value for path costs
B. The long method uses a 64-bit value for path costs
C. The default path cost method is long
D. MST supports only the long path cost method
E. The default path cost method is short
F. MST supports the short and long path cost methods

this ones was the same :
What Cisco Catalyst switch feature is designed to inspect ARP packets and mitigate ARP spoofing attacks?

A. DHCP snppoing
B. port security
C. 802.1x
D. DAI

Which two configuration requirements for port security are true? (Choose two)

A. Port security must be enabled at the global level
B. Port security must be enabled at the port level
C. The port must be part of a trunk
D. The port must be a SPAN port
E. The port must be part of an EtherChannel bundle
F. The port must be in access mode

Which two limitations of IP Source Guard are true? (Choose two)

A. It is supported only on ingress Layer 2 ports
B. It is supported only on ingress Layers 3 ports
C. It is supported only on packets switched in hardware
D. It is supported only on PAgP EtherChannels
E. It is supported only on egress Layer 3 ports

Which two statements about the network environment are true? (Choose two)

A. The interface was error-disabled as the result of STP
B. UDLD aggressive mode put the interface into an error-disabled state
C. After the error is corrected, the udld reset command recovers the disabled ports
D. UDLD negotiation failed when the neighbor switch went offline
E. The UDLD mode changed from normal to aggressive when the error was detected

and thats all that I remember

@Dan21

I could be wrong but source guard is used to prevent man in the middle attack and do with DHCP snooping. BPDU guard would put a port in err-disable if it received another BPDU say from a rough switch.

Which two statements about LLDP frames are true? (Choose two)

A. LLDP frame sends to multicast address.
B. LLDP frame has its own CRC.
C. LLDP frame contains unicast address within its fields.
D. LLDP frame consists of sequence of TLVs.

A B and D all seem right…

@Dan21

HSRP,VTP & LACP

@JJ

I studied the questions on the right (all sub-sections) and Part 6,7,8. I had an old dump which had around 376 pages. But I couldn’t cover them all though.

@certprepare can you please update the “new questions”? Like 2 of them shits were even on the exam.

Hi Guys,

For those who passed the exam and receive the DND for RSPAN (True and False)

Can someone please confirm what are the correct details?

I have the following information below but just grab the keyword per answer:

RSPAN True
MAC Address
Trunk
STP
2-1024

RSPAN False
VTP
Access Port
2-1005

Thank you

When using RSPAN, why can’t I use VLAN ID’s 2 through 1005, but I CAN use 2 through 1024?

This makes ZERO sense to me.

When creating RSPAN VLANS only the following VLANS ID are ALLOWED
2 to 1001 AND
1006 to 4094

@Dan21 EXTENDED VLANS 1006-4094

Which VTP mode is needed to configure an extended VLAN, when a switch is configured to use VTP versions 1 or 2?
A. transparent
B. client
C. server
D. Extended VLANs are only supported in version 3 and not in versions 1 or 2.

What is the answer ????????????????? here said A, but I am pretty sure that is D, what do you think guys????????

Hi guys!!
i passed today with 9XX, all questions were from Composite Quizzes and New Updated Questions Part 6, 7 and 8.

Same Labs: LACP with STP, HSRP, VTP3.

DnD:
– CDP and LLDP
– Stachwise and VSS
– HSRP and VRRP

I remember the following question:

What are three types of RADIUS server responses? (Choose three)

A. Accept
B. Reject
C. Challenge
D. Get Password
E. Cancel

Answer: A B C

@Khuiper

composite quizes? whats that?

will take the exam in 3 days. I studied all Q here in premium. is this site still valid? pls help

@dmpstr So far so good, they said if we study the concepts will be sufficient.
@Dan21 is on premium side of this site

Passed today!!!!

Don’t only study dumps, …. you need to have clear concept about the answer!!!
Most of questions are tricky by Cisco. So please study and go… Good Luck guys!

Labs: LACP with STP, HSRP, VTP3.

DnD:
– Stachwise and VSS
– HSRP and VRRP

Question which I remember:

What are three types of RADIUS server responses? (Choose three)

A. Accept
B. Reject
C. Get Password
D. Cancel
E. Challenge

Answer: A B E

What Cisco Catalyst switch feature is designed to inspect ARP packets and mitigate ARP spoofing attacks?

A. DHCP snppoing
B. port security
C. 802.1x
D. DAI

Ans D

Which two configuration requirements for port security are true? (Choose two)

A. Port security must be enabled at the global level
B. Port security must be enabled at the port level
C. The port must be part of a trunk
D. The port must be a SPAN port
E. The port must be part of an EtherChannel bundle
F. The port must be in access mode
Ans : B F

Which two limitations of IP Source Guard are true? (Choose two)

A. It is supported only on ingress Layer 2 ports
B. It is supported only on ingress Layers 3 ports
C. It is supported only on packets switched in hardware
D. It is supported only on PAgP EtherChannels
E. It is supported only on egress Layer 3 ports

Ans : A C

I am taking the exam today.
Please mention which “DRAG n DROP” you got in the exam.
If any questions you remember please.

Thank you so much!

@WEST are those quizzes composed of the same questions that are in the PDF and the parts 6 7 8?

@Dan21, NO, the composite quizzess don’t include the new updated questions 6, 7 and 8. They are quizzess that select ramdomly 50 questions from the specific chapters

@Anonymous

D- only VTP3

I am taking the exam today.
Please mention which “DRAG n DROP” you got in the exam.
If any questions you remember please.

Thank you so much!

To which VLAN is a dynamic access port assigned by default?
is it VLAN 1 or NONE?
Please Confirm !

NONE

I did exam today. Passed with 9xx
All questions were from this site
Lacp lab
Vtp hsrp sim

Which configuration do you apply to an interface so that it uses port security to learn and commit the first MAC address?

A. Configure the switchport switch-port security violation restrict 1 command.
B. Enable the sticky MAC addresses feature.
C. Enable the static secure MAC addresses feature.
D. Configure the switch for port-security aging type inactivity command.
E. Configure the switchport port-security maximum 1 command.
F. Disable the sticky MAC addresses feature.

B or E and why?..

Which configuration do you apply to an interface so that it uses port security to learn and commit the first MAC address?

A. Configure the switchport switch-port security violation restrict 1 command.
B. Enable the sticky MAC addresses feature.
C. Enable the static secure MAC addresses feature.
D. Configure the switch for port-security aging type inactivity command.
E. Configure the switchport port-security maximum 1 command.
F. Disable the sticky MAC addresses feature.

Answer B

Reason:
“.. learn and commit the first MAC address…” <- this suggests the learned mac address needs to persist in configuration. Sticky MAC address will do that.
Also, the default setting for port security is 1 learned address. We dont need to configure it specifically as given in E

Which VTP mode is needed to configure an extended VLAN, when a switch is configured to use VTP versions 1 or 2?
A. transparent <- Correct (I've tested n hardware)
B. client
C. server
D. Extended VLANs are only supported in version 3 and not in versions 1 or 2.

For LACP with STP

Last line was
In practical when you apply commands under “interface port-channel 1”, the same commands will be automatically applied to the physical member interfaces (of port-channel 1) so you don’t need to type them under physical member interfaces again. But in this exam you should configure everything under physical interfaces as there is a requirement to do so

CAN ANYONE TELL ME THE COMMANDS TO DO IT ?