Share your SWITCH v2.0 Experience

@Bez

All the dumps including the certprepare say A IP source guard… please explain…

3、You are adding new VLANs. VLAN500 and VLAN600 to the topology in such
way that you need to configure SW1 as primary root for VLAN 500 and
secondary for
VLAN 600 and SW2 as primary root for VLAN 600 and secondary for VLAN
500. Which configuration step is valid?
A. Configure VLAN 500 & VLAN 600 on both SW1 & SW2
B. Configure VLAN 500 and VLAN 600 on SW1 only
C. Configure VLAN 500 and VLAN 600 on SW2 only
D. Configure VLAN 500 and VLAN 600 on SW1 ,SW2 and SW4
E. On SW2; configure vtp mode as off and configure VLAN 500 and VLAN 600;

Does anyone know the answer? Some say A and other say B!!!

It has to be A

@Dan21
A network engineer is trying to prevent users from connecting unauthorized equipment to a production network. Which option can be campus-wide to satisfy this requirement?
A. IP Source Guard
B. switch port block
C. Uplink fast
D. private VLANs
E. BPDU Guard

Ans: A
BPDU guard will come if there is switch plug to port.
IP source guard will use for anything unauthorized workstation or ipad, etc etc

Which configuration do you apply to an interface so that it uses port security to learn and commit the first MAC address?

A. Configure the switchport switch-port security violation restrict 1 command.
B. Enable the sticky MAC addresses feature.
C. Enable the static secure MAC addresses feature.
D. Configure the switch for port-security aging type inactivity command.
E. Configure the switchport port-security maximum 1 command.
F. Disable the sticky MAC addresses feature.

B or E and why?

@Anonymous
The key command for this is E which allows the port to learn only 1 mac but it goes hand in hand with the sticky feature. Have the access port shutdown enable sticky and maximum 1 then no shut the port. It learns the only mac you want it to learn and adds it to running config so it won’t lose it.

@Switch,

So that means sticky is also right judging from your explanation…

Guys, I passed just now with 867 marks. It was easy. Actually I got 100% in Infrastructure services but only 72% in Layer 2 technologies, & 92% in Infrastructure Security. I feel i messed up in MEC,VTP,802.1Header etc. I got the below questions I have not seen before, or I could have missed.

show private vlans command?
commands to configure VRRP on Gi0/0
limitations of MEC

@Oneway,

Which sims did you get?

@oneway
Which dump you studied. Part 6,7,8 only or any other Extra
Dump?

Which VTP mode is needed to configure an extended VLAN, when a switch is configured to use VTP versions 1 or 2?
A. transparent
B. client
C. server
D. Extended VLANs are only supported in version 3 and not in versions 1 or 2.

What is the answer ????????????????? here said A, but I am pretty sure that is D, what do you think guys????????

Guard Root:
+ protect designated port from receiving superior BPDU
+ a better BPDU disables the port as err-disabled
Guard Loop:
+ port self recovery
+ detecting unidirectional switching links

Can someone validate? The certprepare dumps have different answers…

@West

Answer is A man. pretty sure. Transparent allows you to use extended vlans

@West

There is no way you can configure extended vlans in switch with vtp version 1&2, even in transparent mode.. you can try it on a lab if you’re still confused

Answer is D for sure

@Moe

answer is SW1 and SW2

Hi, gents. Just noticed that from Pearson those exams are not available. Has anybody tried?

@Black route my friend just went to the exam and he saw this issue too?!
Does that mean we are not able to do the 300-115 exam anymore ??

On Pearson website:
Alert:
This website is scheduled to undergo routine maintenance on Saturday, 15 February 5:00 p.m.- Sunday, 16 February 2:00 a.m. CST. During this time, you may not be able to schedule, reschedule or cancel test appointments. We apologize for this inconvenience and thank you for your patience.
I think we have to wait till Feb.16

Anyone who already pass the exam, do you have in the exam questions about the TVL’s?

Hi everyone I read all the document about this question but still not find the exact response,PLZ Help me
Which option is the most likely explanation of the duplicate address message logged?
A. spanninedg-tree loop
B. HSRP misconfiguration
C. a PC with IP of 10.10.1.1
D. a hardware problem
A or B ???

@girll

ans is A

@Moe

I solved by calling pearson vue. They can book you the exam by phone to the desired testing center.

Give it a try and check the availability. Hope it helps

LOTS OF NEW QUESTIONS. SIMS LACP VTP HSRP. LESS THAN 10 MCQ FROM HERE AND PL.

@girll

ans is B

DNDS ARE ALSO NOT THE SAME FROM HERE

Today passed 300-115 exam, thanks certprepare team for providing guidance through this website.

@Anonymous can you share some questions?

@certprepare can you please update the “new questions”? Like 2 of them shits were even on the exam.

Hi everyone, so i am thinking take this exam, do you know if need to study the complete 1000 questions or there are a dump with less questions?

Pass today… wasnt easy but I pass.
If you don t know forget the exam, dumps are valid but the questions are made a litle bit diferent
Equal question to the site and a dump that I have only see 5 or 6 the others questions are made by diferent maner and if you dont know you will fail…
Dnds and labs/sim are qual to this site…
44 questions 790 to pass and I have 845… it was good enough to pass…
A lot of questions about dhcp, rspan, aaa… the exam it was almost this topics…
Good luck to everyone