Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Managed to passed with 8xx using just only this site however many new questions and they were tricky , sim same , dnd same with few new options
Good luck
@Passed and CCNP now pleases can you remember and share with us the new question that ou have on your exam. thank’s in advance
passed exam today, 87x, marks.
Labs
LACP with STP
VTP V3
HSRP
LACP lab was miss, was first question and i just couldn’t make trunk up.
I think 1149q dums alone are enough.
One new question about multichassis Etherchannel.
1). Generate hash algorithm.
2). Doesn’t support static mode.
3). Support static auto mode.
4). Support PAGP and IEEE LACP
5). Support only PAGP.
GOOD LUCK DEARS.
EtherChannel Protocols
Even though MEC and vPC are distributed EtherChannels, they inherit all the properties of an EtherChannel used in traditional network. There are two EtherChannel protocols available today: PAgP and the industry standard LACP (802.3ad).
MEC supports PAgP and standard IEEE 802.3ad with manual mode and LACP negotiation. vPC supports the standard IEEE 802.3ad manual mode and LACP negotiation. As best practice, LACP common protocol should be configured when connecting MEC and vPC as LACP makes sure of optimal convergence and configuration consistency checking. With LACP, it is best practice to have the LACP mode of operation set to active/active, keep the default timer values, and use the Unidirectional Link Detection (UDLD) feature for the link member integrity check.
Hi everyone, this is the last exam that i need to pass. My doubt how many questions are to study from this site?
Anybody here know how to verify in exam if LACP with STP config works?
PLZ which response is correct ?
You move a switch from a network where it performed Layer 2 switching only to a network where it performs Layer 2 switching and Layer 3 routing. You
notice that the switch is showing high CPU usage and significantly degraded routing performance. Which command sequence do you use to troubleshoot
and fix the problem?
A. #show running-config
(config)#ip routing
B. #show sdm prefer
(config)#sdm prefer vlan
C. #show sdm prefer
(config)#sdm prefer routing
D. #show sdm prefer
(config)#sdm prefer default
Can someone Answer Mirco’s question? I’m not sure about this one
Which two statements about static MAC addresses are true? (Choose two)
A.They are configured without an aging time.
B.They have a default aging time of 300 seconds.
C.They supersede dynamically learned MAC address.
D.They can be configured on multiple interfaces in the same VLAN.
E.They have a default aging time of 60 seconds.
Passed in the last 3 days
Lacp lab, hsrp sim and vtp 3.
Questions are pretty much the same in the premium section which probably totals around 1000 questions.
This is the most stupid Cisco exam I ever took. The quality of the question were made by a 5 year old that had English as their 3rd language.
So many error on the questions!!! Initially I believed they were only errors in the dumps, I was very surprised that they were actually in the exam.
So in short, premium dumps are valid.
@Paplo
What do you mean Premium dump? are you talking about the PDF and the updated questions part 6,7,8??
Passed today on the second attempt.
I have to say, while invaluable as a “past papers” type tool, a good number of the answers on here are wrong, and of course there are some new questions. Use them as a study tool rather than a straight crib sheet – if you don’t know why the answer here is different to what you would put, look it up – it may be wrong here.
Got the HSRP Sim, the LACP/STP SIM, and the one “choose 2” that I keep finding the hardest – where do you configure untrusted DHCP snooping in an ISP environment.
Oh – and the VTP v3 SIM.
@paplo
What you mean premium dump. Only part 6,7,8 ? Or any other Extra material.
Thank you
Please can someone share 1149q dums?
@fafacalvs
Thank you for the explanation. I will be honest, for me every test is a big stress and when I am stressed my brain works for 40 percent : – ). So I didn’t realize it during the test.
@Help
Help, look at the explanation from Fafacalvs please.
@fafacalvs
LACP/STP: The task was not to configure interface fa0/1. So I let it in access mode.
What D&Ds did you guys have today?
And can someone explain this one?
multichassis Etherchannel.
1). Generate hash algorithm.
2). Doesn’t supporwdt static mode.
3). Support static auto mode.
4). Support PAGP and IEEE LACP
5). Support only PAGP.
soooo….like 2 of those questions from the “New Updated Questions Part 6,7,8” section were even on the test. Who is picking the questions for those sections?
Which two statements about static MAC addresses are true? (Choose two)
A.They are configured without an aging time.
B.They have a default aging time of 300 seconds.
C.They supersede dynamically learned MAC address.
D.They can be configured on multiple interfaces in the same VLAN.
E.They have a default aging time of 60 seconds.
AD
@NANA check in the previous pages, you will find it.
@Dark
Yes I agree but why?
@TY
a q What is the value of the TPID/tag protocol identifier of QinQ?
A. 0x88a8
B. 0x8100
C. 0x8b45
D. 0x8200
Answer: A and it shuld be answer B.
I think A is correct….
0x8100 – This TPID is used in 802.1Q – its your average, everyday VLAN tagging. A common use for VLANs is for enterprises to organize their network into functional groups (like research, finance, or management).
0x88a8 – This TPID is used in 802.11ad – its used for provider bridging (also known as QinQ, stacked VLANs, or double tagging).
Anyone got the updated question 6 and 7 and 8?
I only got one PDF that has 263 pages and the tite is updated questions 6!
Please advise since I doing the exam in two days!
Please help
@Moe,
I got it… whats your email?
Hey @Dan21 could you share it with me as well sangraparthvee0444@ gmail.com
Hi, I pass my route!
Going for switch and tshoot. Anyone got materials to share?
Email me at {email not allowed} please
The Cisco StackWise dual-active detection mechanism is most useful under which condition?
A. when the active switch experiences a MEC link failure
B. when the active switch experiences a standby failure
C. when the active switch enters an inoperable state
D. when the active switch is still operational after a virtual link failure
Correct Answer: D or B????
Which command configures an interface to accept LLDP packets without enabling the interface to send the
packets?
A. lldp receive
B. lldp tlv-select
C. lldp run
D. lldp transmit
Im getting mixed answers between A and B. can someone explain?
@Dan21, below my email and thank you
mohammed.alosfur(at)gmail(dot)com