Share your SWITCH v2.0 Experience

@uBit , appreciate for confirming it.

God Bless!

pass today 87x. Thanks cert prep for your help. (premium member)
44 Questions none bug. 3 news questions and 2 D&D with new presentation. D&D HSRP and VRRP and Stackwise against VSS. not present here.
Simlet HSRP and VTPv3. LACP+STP lab. Exactly the same that here. (Just that the VLan 1 was already present just do no shut on the SVI interface.
None Bugs.
A lot of security questions with Guard loop , Command line for security-violation.
not easy but possible to pass with study.

Thanks Portuguese guy.

Passed guys new questions never seen about qos and cos configuration.

going to take exam today. thanks for help

Just passed with low 9XX.
2 or 3 new or similar question and the usual lab LACP + VTP, HSRP and VTP3 simlets and 3-4 drag and drops from this site. One D&D for source port/destination port that was a bit different,
My LACP lab was a total disaster and i spend 15 min fixing it. After configuring switch B fa0/3 did not have the right encapsulation. The port-channels were created during the channel-group 1 command so i had to configure each one of them to match the ports. On switch B had to remove all the config from Fa0/3-4 add the channel-group 1 mode passive an channel-protocol lacp and configure the rest from the port-channel. This was the only way for me to have the port-channel and the Fa0/3-4 match the config. I got 50% of the questions from Part 6,7 and 8 and the rest from the general pool in certprepare. You will need to study them all to be sure you will pass.I used certprepare premium and own research to complete this test. Thank you certprepare

One more thing. On the HSRP simlet i got the question for E0/1 not E0/0 as per certprepare so the
right answer for me was the one with the default priority of 100.

@Mitzov do you remember the drag and drops that was on the exams?

@Mitzov
Can you explain why you chose default priority 100 in the HSRP?

I have passed on Friday with 860 score.
2 D&D Radius vs Tacacs, Source span vs Destination Span. Only 2 new questions related with VSS. LACP with STP Lab, VTP and HSRP simlet.

I have the valid dump with 355 questions. if anyone is interested please contact me at
dams.vce1290 AT gmail DOT com.

Good luck!

@Proton
Hey, On switch A, is int Vlan 1 suppose to stay shutdown? I don’t see no shut anywhere on your solution, or on certprepare actually… can you explain?

@nits
Drag drop about GLBP. Drag the correct items from the right to the corresponding terms on the left.

Answer:

AVG – Assign MAC for client in subnet
AVF – forward traffic sent to MAC
ARP – this protocol to learn MAC when know IP
Gateway priority – use to elect active virtual gateway

Drag drop about Switch Stack process

Answer:

+ Initializing: The stack master has successfully installed a configuration on device
+ Progressing: The stack master is communicating with a new switch
+ Provisioned: Ports have been assigned in the running configuration of the stacks
+ Ready: The switch is operational
+ Waiting: The stack master is actively performed discovery

And one for source port/destination port that i did not see in certprepare or it was just warded differently

@Ubit
The HSRP sim at certprapare is asking you a question about e0/0 if it goes down and comes back up. On the Exam i had the same question but for E0/1. If you do sh run you will see the E0/1 does not have priority configured ( than it si defaulting to 100 ) and no decrement configured so the correct answer is:
The interface will default to the priority of 100 for HSRP group 1.
This is what i selected anyway.

A question about storm control based on optimal storm-control configuring.
A. storm-control broadcast level 10bps
B. storm-control broadcast level 10pps
C. storm-control broadcast level 20 10
D. storm-control broadcast enable
Answer: C

##Which private VLAN access port belongs to the primary VLAN and can communicate with all interfaces, itencluding the community and isolated host ports?
A. promiscuous port
B. isolated port
C. community port
D. trunk port
Answer: A…

@Dan21, Interaface VLAN 1 is configured on Switch B and not on Switch A. I checked certprep and it also does not include Interface VLAN in it.

For those who passed, can someone assist if there is no interface vlan 1 needed to be configured or un-shut?

passed yesterday . LACP with STP, VTP3, and HSRP sims. Multiple choice questions seemed like the toughest part, might have reworded a few. Study the composite quizzes and the New questions 6,7,8 and should be good to go. on the VTP3 sim I believe the answer is create vlan 500 and 600 on SW1 only, it is the primary VTP server so it should propogate. Thats what I chose , obviously i dont know if it was marked right or not.

guys passed recently, d&d rspan true-false, but not the one here, so read carefully about rspan vlan.

Hi Nickname congratulation for your CCNP . please can you share with me the new questions 6,7,8 my address is aurelienlandry2 @ gmail . com

@Proton
I did not configure interface vlan 1 on switch A in LACP+VTP Lab.
On switch B interface vlan 1 was already configured but i run the commands just in case as my LAB had so many bugs and wanted to make sure all is good

@Mitzov

Thank you for confirming.

If that is the case better to perform show run on both Switch A and B to ensure if interface vlan 1 is needed to be added or not.

God Bless

@certprepare , @premium members
Do the 15 composite quizzes include all questions under the 300-115 section on the right including D&D and miscellaneous? I assume they don’t include the new updated 6,7,8 sections.

Its appears that SIMs like HSRP, VTP are like multiple choices? i dont see anything to configure on console.
Is that correct

can someone share the composite quizzes? or where to find it? and the new questions from 678. thanks a lot. 🙏

@Quizzes – You can find them in the premium membership section. If you’re taking an exam that costs $300, spend an extra $12 on a 15 day membership….. Its well worth the money.

Hi Guys, I passed my CCNP Switch on 3rd Feb and want to bring into your attention, 50 % exam was from this https://www.certprepare.com/

Passed today 9xx. Regarding the below question in the HSRP simulation, the question in the exam is asking about a bounce in Ethernet0/1 not 0/0, but the answer is the same (C) as in certprepe.com because the track in the exam is linked to Ethernet0/1 also. I put this here becuase yesterday someone said something about it and he selected the default (E). The default priority is not correct for group 1 specially.

If router R1 interface Etherne0/1 goes down and recovers, which of the statement regarding HSRP priority is true?
A. The interface will have the priority decremented by 40 for HSRP group 1.
B. The interface will have the priority decremented by 60 for HSRP group 1
C. The interface will have its current priority incremented by 40 for HSRP group 1
D. The interface will have its current priority incremented by 60 for HSRP group 1
E. The interface will default to the a priority of 100 for HSRP group 1

in the exam running config you will find;
!
track 1 interface ethernet0/1 line-protocol
!
Other than that nearly everything is the same as the people said previously.

is the switch oct 2019 pdf enough to pass ?

What happens if an interface within channel group is configured as SPAN destination?
A. Portchannel will forward traffic to source span
B. will not be operational
C. the link will be in error-disable
D. The interface will be removed from the channel group

Can anyone help? is it B or D. Please explain

@dan21
D

@FPM

can you explain? a lot of dumps say B

does anyone know the password to modify the vce?