Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@Help. Thank you very much!
@Squiggie28
Your member account still avalaible ?
can you share it with me ?
You can mail me at : univenet at free dot fr
thank you
@Squiggie28
Your member account still avalaible ?
can you share it with me ?
You can mail me at : univernet at free dot fr (this is the right email)
thank you
30.01 I passed the test with the result 94x/1000. There were a few new questions, about 8 that were nowhere to be found. I watched the forum and 1056Qdumps plus self-study. Theoretical questions are evaluated by 11 points. So I answered 5 questions incorrectly. Part of the 8 questions answered on the account of knowledge, well, there were questions from the old ones, where I made a mistake. Thank you all, now I have ROUTE and the deadline is February 23! Let me remind you if anyone doesn’t know. If You do not pass, the next exam can be taken in 5 calendar days. To have an extra try. February 16 and February 22, for example
@certprepare , Please be informed that my premium membership will be expired on 14 Feb 2020.My exam is 20 Feb 2020 thus I would like to request for 6 more days.
Thank you
I have Spoto dumps 386 Questions purchased on dated Jan 6 2020
any one please confirm still valid I will share file with you guys
@ JK
share your email. for help and to share dumps
Passed. Score: 8XX
Few New and also old questions: Dont remember completely but something like (Switch in Mesh network, IP Source Guard, UDLD between two switches, HSRP, HSRP group, GLBP, DHCP, CDP, LLDP, etc)
Sim: HSRP, VT
Lab: STP with LACP
Get concepts of each topic.
@Anonymous
LLDP global state Disabled
LLDP holdtime (before discarding) 120 seconds
LLDP timer (packet update frequency) 30 seconds
LLDP reinitialization delay 2 seconds
LLDP tlv-select Disabled to send and receive all TLVs.
LLDP interface state Disabled
LLDP receive Disabled
LLDP transmit Disabled
LLDP med-tlv-select Disabled to send all LLDP-MED TLVs
@SWITCH-passed which dump did you use
@Karim,
Can you share poto dumps 386 Questions ?
You can mail me at : univernet at free dot fr
thank you
@Karim,
Can you share your Spoto dumps 386 Questions ?
You can mail me at : univernet at free dot fr
thank you
Hey Karim,
Could you please share Spoto?
weirdsega @ gmail . com
I`m preparing the CCNP TShoot and I’m thinking about the possibility to prepare the CCNP Switch but I’m not sure if it is feasible or not to prepare the exam in only 2 weeks.
What do you think? With the premium account and studing only with the sims and quetions from certprepare, Do you believe that is feasible in only 2 weeks?
@Karim,
please share spoto dumps. my email add. kindly remove the spaces. appreciate you help brother.
john . sventer@gmail . com
Passed 923..real person not a bot..hsrp..lacp..vtp3…all the same even values…only thing I didnt expect was there was an active trunk between rtr A and switch a which threw me off
@Karim,
please share spoto dumps. my email
univernet at free dot fr
thank you
What’s best resources for tshoot?
Which statement describes the result of issuing the spanning-tree portfast trunk command under interface configuration mode?
A. The port is allowed to go into the forwarding state immediately regardless of whether the interface is configured as an access or trunk port.
B. The port enters the errdisable state if BPDUs are received.
C. Trunk interfaces can be configured for portfast.
D. The portfast trunk port immediately replaces the lost root port with an alternate root port.
Ans(dump): C but should it not be A?
Passed today.
Got HSRP, VTPv3 and LACP with STP.
For Dnd HSRP/VRRP and Stackwise/VSS.
Tshoot next.
@Alpha-Bravo congratulations, which dumps document did you use?
@nits
Which statement describes the result of issuing the spanning-tree portfast trunk command under interface configuration mode?
A. The port is allowed to go into the forwarding state immediately regardless of whether the interface is configured as an access or trunk port.
B. The port enters the errdisable state if BPDUs are received.
C. Trunk interfaces can be configured for portfast.
D. The portfast trunk port immediately replaces the lost root port with an alternate root port.
Correct Answer : A
As per multiple source that I checked online and in certprepare premium Q@A
For the GNS3 labs what is the preferred Switch model to use?
@Mitzov thanks
Pass today 9xx.
All you need to pass is from certprepare. Labs are the same. Questions the same , all the same. You do not need any other dump , all is here.
can somebody confirm if the 19 DnDs from the october file is enough.
thanks guys.
Hi Everyone,
May I ask for your expertise regarding this question?
Which two operational attributes can be checked for EtherChannel ports that are in err-disabled state?
(Choose two.)
A. Port mode
B. Port cost
C. Duplex
D. DTP
E. VLAN
From my understanding, Etherchannel won’t successfully pair if they have a mismatch in the Port Mode and Vlans (Correct me if I am wrong)
Thank you in advance!
@karim o @anyone
please share spoto dump
kito4.pg @ gmail.com
@Finally, what did you do on that active trunk between RtrA and SwA?
Hi, Can anyone help clarify something? I downlaoded the PDF : https://www.certprepare.com/switch-questions-and-answers
People are talking about a Part 7 and 8 but I only see Part 6 on there. Can someone explain?