Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
The port fa0/1 on Switch A is configured as Access,
I am sure we need to change it. What could be the configuration for this?
@nits
http: // www. mediafire. com/s/tw47tpsv1acg5mu/ 300-115 _IPHelper_August_2019-PDF
@GOKUSWITCH removed all spaces but not working
@GOKUSWITCH
Link not working. could you please share it again.
@CCNP-Switch
Many thanks for your feedback
But which dump did you use ?
@CCNP-Switch congratulation for passing and good luck for the other. and thank you for sharing.
i just want to ask you how did you implement the LACP lab.
– is the ether-channel configured or configured by your self?
– did you test your answer by ping or what ?
– is already vlan ip configured or you configure it by your self ?
what is your advice about LACP ?
I have passed the exam now. Score 8xx. DnDs and Labs are the same. 1Q was new. Learn the dump and Labs and write the exam.
Good luck!!
@Coolzzz
What DND did you have on your exam?
@Coolzzz which dump did you use the one Oct_2019 or another one?
passed the switch exam, labs HSRP, LACP with STP and VTPV3,
on HSRP please be keen on the below.
n HSRP sim, they asked about port E1/0 connected to router R5 goes down instead of “If router R1 interface Etherne0/0 goes down and recovers, which of the statement regarding HSRP priority is true?” “, so the answer is “The interface will default to a priority of 100 for HSRP group 1” and NOT “The interface will have its current priority incremented by 40 for HSRP group 1”
The port asked is E1/0 not E0/0.
I am selling premium membership for $15. send me a message kelvincenka @ gmail dot com
@Kelvincenka, what reviewer did you use? How many days remaining on your premium membership?
Message for certprep could you update part 9 for the new questions please?
And confirm us the new answer on HSRP sim please. From Kenvin above ?
I have to pass the exam next week.
I’m premium member.
Thanks for your help.
@Coolzzz
congratulation for passing and good luck for the other. and thank you for sharing.
i just want to ask you how did you implement the LACP lab.
– is the ether-channel configured or configured by your self?
– did you test your answer by ping or what ?
– is already vlan ip configured or you configure it by your self ?
what is your advice about LACP ?
Hi all,
Premium membership ending on Feb 20 for sale.
23 days remaining – $13
darkness.evil ( a t ) mail.bg
CCNP-Switch , thanks for your explanation on the HSRP issue,makes sense to me. If no priority is given , assume the default of 100, great stuff. Thanks
Is the “ip helper august 2019 – pdf” the same as the “ip helper august 2019 – VCE”
@GOKUSWITCH
Congrats on passing. Got mine scheduled for the last day to take it, so its do or die. Please send the IP Helper file when you can.
switch010101 at gmail com
Hi friends
Today pass 300-115 with 8xx, thaks for your coments. There is 10 question that I not see in this foro about SPAN, Etherchannel, Stackwise.
4 D&D about radius vs tacacs, SPAN source, destination, AVG-AVF, STP-MST.
lab LACP-VTP, sim HSRP, VTPv3
Hello,
Dnds: RSPAN, Radius and Tacacs, …
Labs are the same: HSRP, LACP…
Questions: page 868 with 30 Questions
@GOKUSWITCH Kindly help us to get the ip helper august 2019 – pdf,
already removed all spaces but not working. thanks in advance!
CCNP-Switch confirm pls if you still need tshoot Nov 19 mcq dump
Passed with 8XX. One DD on Radius/tacacs. LACP/HSRP/VTP labs identical to what’s previously mentioned. I agree with earlier poster: Stuff on this site plus the first 200 pages of Aug 2019 IP Helper will get you the info you need to help pass. There’s no one place you’re going to find every question. Understand the concepts, review what’s here and you’ll be fine.
There were only 3 or so questions I hadn’t already seen. Appreciate everyone’s thoughts here as that helped. Best wishes all.
@PASSED could you share the Aug 2019 ip helper dumps ?
@s3lm3n
Configure the Etherchannel first & then move on to the ports – Easier & better. Do also mind that only one Switch let us configure the “switchport trunk encapsulation” command and also use “show etherchannel summ” to verify it. I had an issue when I placed this command and the etherchannel went down. But it’s fairly easy
It clearly says all configuration must be done on physical interfaces
@LACP witch STP ab. You just remove the vlans in that port and that’s it, if you run the no switchport mode access in the exam it tells you it’s not possible because a port must be either in access or trunk mode. At least that’s what I got when ran that command in the exam. Just continue with the rest of the configuration and you’ll be fine.
@GOKUSWITCH. No luck yet with the THOOT dumps :(
@Weston. I used this two dumps, primarily the one with name “300-115 – Updated 1-09-2020” that I got from someone who shared it on page 795-797 if I don’t remember bad, just remove spaces:
http : / / www . mediafire . com / file / oh0rlmnzasqvq5o/300-115_-_Updated_1-09-2020.pdf / file
http : / / www . mediafire . com / file / ypuhcbel4feyltt/300-115_IPHelper_August_2019-PDF.pdf / file
@s3lm3n. Please read below the answers to your questions:
– is the ether-channel configured or configured by your self?
You must configure it, it’s part of the lab/exam.
– did you test your answer by ping or what ?
I tested by ping at the begining and it did not work, when I completed the configuration tested again and this time it worked, also confirmed there was a trunk formed with encapsulation dot1q and allowing vlans 21-23, just run the commands provided by certprepare for verification and also run the “no shutdown” command in all the interfaces you configure since ALL of them are shutdown by default in the exam, my channel was not established for that reason because I forgot to run it in one of the f0/3 – 4 sides and troubleshooting noticed that and when ran “no shutdown” the channel was established right away.
– is already vlan ip configured or you configure it by your self ?
You must configure it also.
what is your advice about LACP ?
Just study all the commands provided in the lab here and don’t forget about the “no shutdown” in all the interfaces ranges you configure, even the ones in access mode in SwitchB for vlans 21-23.
@Help. Yes I still need it, I have not been able to find it.