Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
| Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
I hope someone can confirm if the DND below are the only DND in the exam.
Drag and Drop
VSS and Stack
VSS:
1. Combines exactly two devices
2. Supported on Cisco 4500 and 6500 series
3. Supported devices that are geographically separated
Stack:
1. Supported on Cisco 3750 and 3850 devices
2. Supported up to nine devices
3. Uses proprietary cabling
======================================
======================================
HSRP vs VRRP
HSRP:
1. MAC Address used – 000.0c9f.f000 to 0000.09c.ffff
2. Multicast address 224.0.0.102
3. Uses only one virtual IP Address
VRRP:
1. IP Protocol 112
2. Track Interfaced
3. Uses Physical Interface
Hi Guys,
Can someone confirm what is the answer for this question?
Which command do you enter on a device so that users are automatically placed in enable mode after they authenticate with TACACS+?
A. aaa authorization exec default group tacacs+ if-authenticated
B. aaa authorization exec default group tacacs+ local-case
C. aaa authorization exec default group tacacs+ enable
D. aaa authentication exec default group tacacs+ if-authenticated
Is it A or D?
Passed today with 9xx/1000 score. i used chinese lite dump labs are the same here in certprepare
@QQQ, can please share the chinese lite dump, thanks
@Yonek, answer is C.
@Prabhu, Thanks for the help
Hello anyone who has a link to VCE full version + Designer ?
@QQQ what s chineese lite dump .. is it same as 591l ab?
I don’t know if it’s the same as 591 but it has 300+ questions that covered the exam
@QQQ can you please share the file. thank you!
who knows the correct answer, those who have passed.
1. A question about HSRP identifier at data link layer?
A. MAC address
B. virtual IP address
C. standby group
Just passed with 95x points. 44 questions, including LACP&STP, HSRP, VTPv3 and one DnD (Tacacs+ vs Radius). Few different questions that i did not have in dumps, but correct answers can be concluded from similar questions from dumps (maybe, maybe not, i have lost somwhere 44 points). Only problem i had was with LACP sim – from some reason, after configuring Switch A with “int range …”, while checking my running config there was difference between fa0/3 and fa0/4 in “switchport mode encapsulation dot1q” command – dont know why. I had to reenter command on fa0/3 only to correct that. So, doublecheck your running config before save
@Kelvichenka
A – dala link layer = MAC addressing
@marxer
Which dumps you have used? Cerprep premium website?
Certprep premium and 349Q&A vce.
@QQQ please, share the dump file.
Hey guays, how you open vce files?
thanks for your help
@marxer please, share share 349Q&A vce please. kito4.pg @ gmail . com
@kito how do you open vce file?. I’m not able to find the crack for vce.
i open vce files in android with a+vce
please share 394vce.
marxer can you share the VCE file pls?
http:(slash)(slash)www(dot)mediafire(dot)com(slash)file(slash)s3vutrg9doy3gdd(slash)SWITCH_Oct_2019(dot)pdf/file
@marxer can you check if you used this file?
Hi guys.
Passed today with 91X points! Thanks for the valueable information on this web site!!!
I got a single DnD (RSPAN), LACP with STP Sim, HSRP Sim, VTPv3 Sim.
The dumps are still valid and the labs 100% accurate. However, I got two new questions about multi-chassis LACP and private VLANs. Not too complicated if you know your stuff.
Good luck to everyone!
-J
@nits
nope. this is an older version, but might help. many questions are the same
@marxer,
can you please share your vce ?
onebitpacket gmail com
Hi Guys,
To all those who passed, can you please confirm if the below DND are the ones appearing in the exam?
VSS and Stack
VSS:
1. Combines exactly two devices
2. Supported on Cisco 4500 and 6500 series
3. Supported devices that are geographically separated
Stack:
1. Supported on Cisco 3750 and 3850 devices
2. Supported up to nine devices
3. Uses proprietary cabling
======================================
======================================
HSRP vs VRRP
HSRP:
1. MAC Address used – 000.0c9f.f000 to 0000.09c.ffff
2. Multicast address 224.0.0.102
3. Uses only one virtual IP Address
VRRP:
1. IP Protocol 112
2. Track Interfaced
3. Uses Physical Interface
======================================
======================================
RSPAN
Create remote VLAN
Create span source IP
Create destination remote VLAN
Create source remote VLAN
Create destination as interface
======================================
======================================
Radius
Combines authentication and authorization
Encrypts only the password
Multi-Vendors
UDP
Tacacs+
Encrypts the entire body
Proprietary
Separate AAA
TCP
@marxer, can you please share 349Q&A vce please. tia!!!
Hi all,
954q dump is still valid ????
From the last test takers it is.