Share your SWITCH v2.0 Experience

@Gambito11 Congrats! Don’t worry, your English is good. Do you remember what Drag & Drop questions you got?

Thank you so much for the information guys and @Yonek.

Guys !!! Configuration of the trunk allowed on the ether channel or the physical? And how to process the no switchport mode access!???

Please i need a VCE suite urgently. Please send to bestleks @ gmail dot com Thanks

@Gambito11 can you write me and talk about the exam please ? rrdmad arroba yahoo punto es. Gracias por adelantado.

Hi for those who passed is D&D all here in certprepare or there are new ones? Premium member here. Thanks a lot!

Guys !!! Configuration of the trunk allowed on the ether channel or the physical? And how to process the no switchport mode access!???

Hi all,

Premium membership ending on Feb 20 for sale.

25 days remaining – $15

darkness.evil ( a t ) mail.bg

@ Gambito11
Can you share with me your Premium membe account ?
please
————————————-
—- univernet at free dot fr —–
————————————-

Hello,

I passed today Switching (901/1000). I am now completed CCNP.

I get completely different questions from the 35 questions posted by black or someone else.

I did not get fully credit for LAB simulation on LACP because of native vlan missmatch.

I could not remove Vlan 98 which were preconfigured on the exam.

SwitchA(config)# interface range fa0/3 -4
SwitchA(config-if)#no switchport mode access
switchA(config-if)#no switchport access vlan 98

other than , I configured everything . I study 1132q .
I can share if you are interested

Good luck.

@300-115. Can you please share the MCQS you got.?..

@300-115 could you share more about your exam ?

@Cisco 300-115
can you share your infos ? please
univernet at free dot fr

Could anyone share exam experience for today’s date?

I have an ccnp switch premium account, i can share with Anyone with ccnp route premium membership account can share

will anyone take the exam tomorrow?

Hello all,

I would like to share 1132q for Switch for free.

Instead of sending email to each person, where can I post the questions so that everyone can use them.

Share the exam question on the comments please

@cisco 300-115

@cisco 300-115

Please share the exam MCQS and dnd questions on the comments

@cisco300115 just copy and paste some of the questions that you got on your exam please

1. Which statement about Stack is true?
A. Same IOS must be installed on all switches. B. Different IOS can be installed on switch members C. ? D. ?

2. A question about HSRP identifier at data link layer?
A. MAC address B. virtual IP address C. standby group

3. A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to spike during peak working hours. What is the root cause of this issue?
A. The VLAN receives additional frames from neighboring switches. B. The SDM VLAN template causes the MAC address-table to overflow. C. The VLAN template disables routing in hardware. D. The switch needs to be rebooted before the SDM template takes effect.
Answer: C

4. Which errdisable recovery command option enables a device to recover from a potential loop condition?
A. link-flap B. security-violation
C. udld D. dtp-flap
Answer: C

5.Which two statements about LLDP frames are true? (Choose two)
A. LLDP frame sends to multicast address. B. LLDP frame has its own CRC. C. LLDP frame contains unicast address within its fields. D. LLDP frame consists of sequence of TLVs. E.

6. In which portion of the frame is the 802.1q header found?
A. within the Ethernet header B. within the Ethernet payload C. within the Ethernet FCS D. within the Ethernet source MAC address

7. A dynamic access port is member of which VLAN by default?
A. VLAN 1 is the default VLAN B. none until the port VLAN is determined

8. Which two commands enable you to determine the native VLAN that is configured on an interface? (Choose two)
A. show interface status B. show interfaces C. show interface trunk D. show running-config E. show interface brief
9. Refer to the exhibit.
! interface GigabitEthernet2/0/1 switchport access vlan 700 switchport trunk allowed vlan 200,300,700 switchport mode trunk end !
Refer to the exhibit. Which statement about the current configuration on port GigabitEthernet2/0/1 is true?
A. It is an access port configured for a phone and a PC B. It is a trunk port and the native VLAN is VLAN1 C. It is a trunk port and the native VLAN is VLAN 700 D. It is an access port in VLAN 700

10. Which two requirements for dot1q trunking in IOS are true? (Choose two)
A. the native VLAN must have the same number on each side of the link B. Spanning-tree PortFast must be enabled C. The encapsulation protocol must be the same on each end of the trunk D. MST must be running if extended VLANs are in use E. ISL must be enabled on the same link

or 10 b. Which two statements about 802.1Q are true? (Choose two)
A. The header is found within the Ethernet trailer. B. Each frame contains a 12-byte VLAN identifier field. C. When it is enabled, the minimum Ethernet frame size is 68 bytes. D. It inserts a 4-bytes tag field to the Ethernet frame. E. Trunking devices add an 8-byte VLAN tag to all VLAN packets.

11. Which feature must be enabled to eliminate the broadcasting of all unknown traffic to switches that are not participating in the specific VLAN?
A. VTP pruning B. port-security C. storm control D. bpdguard

12. Which two options are advantages of deploying VTPv3? (Choose two)
A. It stores the VTP domain password securely as a SHA-1 hash B. It adds an FCS field at the end of each VTP frame for consistency checking C. It supports the propagation of private VLANs D. It supports the use of AES to encrypt VTP messaging E. It can be configured to allow only one VTP server to make changes to the VTP domain

13. Which two statements about VTP modes are true? (Choose two)
A. Private VLANs are supported on devices that run VTP version 2 in transparent mode B. Extended VLANs are supported only on devices that run VTP version 3 in server mode C. When VTP pruning is enabled on a VTP server, it is enabled for the entire management domain D. Extended VLANs are supported only on devices that run VTP version 3 in client mode E. Private VLANs are supported on devices that run any version of VTP in server mode

14. Which option is valid for EtherChannel load balancing?
A. source MAC address and source IP address B. destination MAC address and destination IP address C. source MAC address and destination IP address D. source MAC address and destination MAC address

15. Which two commands can you enter to configure load-balancing at Layer 2? (Choose two)
A. port-channel load-balance dst-ip B. port-channel load-balance src-dst-ip C. port-channel load-balance src-mac D. port-channel load-balance src-dest-mac E. port-channel load-balance src-ip

16. A question based on MAC address table. (Choose two)
VLAN
MAC
Interface
10
aaa.aaa.aaa
Fa0/1
10
ccc.ccc.ccc
Fa0/3
20
aaa.aaa.aaa
Fa0/2
A. Fa0/1, Fa0/2 cannot communicate in Layer 2 switch. B. Fa0/1, Fa0/3 cannot communicate in Layer 2 switch. C. Fa0/2, Fa0/3 can communicate Layer 2 switch. D. Two MAC address aaa.aaa.aaa.aaa must be in same VLAN. E. Two MAC address aaa.aaa.aaa.aaa must be in different VLAN.
Answer: A

17. Which command apply fast forwarding on all ports?
A. spanning-tree portfast B. spanning-tree portfast default

18. Which command configures all access ports on a switch to immediately enter the forwarding state when the switch is reset?
A. spanning-tree portfast bpduguard default B. spanning-tree portfast default C. spanning-tree portfast D. spanning-tree portfast bpdufilter default

19. Which statement describes what happens when a port configured with root guard receives a superior BPDU?
A. The port goes into errdisabled state and stops forwarding traffic. B. The port goes into BPDU-inconsistent state and stops forwarding traffic. C. The port goes into loop-inconsistent state and stops forwarding traffic. D. The port goes into root-inconsistent state and stops forwarding traffic.

20. Which statement about SPAN is true?
A. It is an industry-standard protocol for mirroring traffic B. SPAN destinations participate in spanning-tree instances C. It uses a specific VLAN to transfer mirrored traffic D. It mirrors traffic from a source port to a destination port on the same switch only E. SPAN destinations also can be SPAN sources

21. A question about the advantage of VSS.
A. It only has one single point of management and IP address B. It only has one multiple point of management and IP address C. It only has one single point of management and MAC address D. It only has every single protocol as the point of management to be used

22. Which switch feature determines validity based on IP-to-MAC address bindings that are stored in a trusted database?
A. Dynamic ARP Inspection B. storm control C. VTP pruning D. DHCP snooping

23. Which two methods are used to configure an untrusted port with option 82? (Choose two)
A. (config)# ip dhcp snooping information option (config)# do show ip dhcp snooping | include 82 (config)# ip dhcp snooping information option allow-untrusted B. (config-if)# ip dhcp snooping information option allow-untrusted C. (config)# ip dhcp untrusted-allow information D. (config-if)# ip dhcp snooping trust-allow information E. (config)# dhcp allow-untrusted option information

24. Which two device types does DHCP snooping treat as untrusted in an ISP environment? (Choose two)
A. end host devices B. customer edge services/devices C. user-facing provider edge devices D. provider edge devices E. provider devices

25. A network engineer wants to ensure Layer 2 isolation of customer traffic using a private VLAN. Which configuration must be made before the private VLAN is configured?
A. Disable VTP and manually assign VLANs. B. Ensure all switches are configured as VTP server mode. C. Configure VTP Transparent Mode. D. Enable VTP version 3.

26. While troubleshooting a network outage, a network engineer discovered an unusually high level of broadcast traffic coming from one of the switch interfaces. Which option decreases consumption of bandwidth used by broadcast traffic?
A. storm control B. SDM routing C. Cisco IOS parser D. integrated routing and bridging E. Dynamic ARP Inspection

27. Which are features of TACACS+? (Choose three)
A. Supports backwards compatible with TACACS B. Encrypts the header C. Encrypts the whole payload D. Uses TCP E. Uses UDP F. Separates Authentication & Authorization

28. Which two differences between RADIUS and TACACS+ are true? (Choose two)
A. Only TACACS+ can combine authentication and authorization function. B. Only RADIUS uses UDP. C. Only RADIUS provide granular control over the CLI commands that a user can execute. D. Only TACACS+ use user privilege levels to determine which commands the user can execute. E. Only TACACS+ uses UDP

29. Which two statements about HSRP timers are true? (Choose two)
A. the default hold timer is 15 seconds B. the default hello timer is 3 seconds C. the default hello timer is 5 seconds D. the default hold timer is 10 seconds E. the default hello timer is 30 seconds F. the default hold timer is 30 seconds

30.Which option is a primary difference between HSRP and GLBP?
A. Only GLBP uses a router BIA to provide gateway redundancy B. Only HSRP uses multiple virtual IP address to provide gateway redundancy in a single standby group C. Only HSRP can use multiple MAC address to provide gateway load balancing over multiple routers D. Only GLBP supports gateway load balancing over multiple routers

31.Which kind of tracking can do in VRRP? (Choose two)
A. route B. interface state C. MAC address D. IP address

32. dnd Answer:
RADIUS: + Multi-vendors + Encrypts only the password + Combines authentication and authorization + UDP
TACACS+: + Proprietary + Separate AAA + Encrypts the entire body + TCP

Hello all,

I posted the question i got today at the exam.

Good luck

@ 300-115 ..

Could you please share the answers ????

@cisco 300 115 …awesome much appreciated if you could share the answers

I am taking my exam this friday, I want to make sure i understand this correctly
LACP,AAAdot1x,MLS EIGRP those labs require inputting commands

VTPv3, HSRP, VTP those labs require me to look at output…

First is this correct and second are these the only “labs” that will be on the exam

@CCNP-Switch

I remenber in my exam only two question drag & drop:

– HSRP /VRRP
– STACKWISE/VSS

@oc3 what is question about the exam?

Good Luck!!

I am taking my exam this friday, I want to make sure i understand this correctly
LACP,AAAdot1x,MLS EIGRP those labs require inputting commands

VTPv3, HSRP, VTP those labs require me to look at output…

First is this correct and second are these the only “labs” that will be on the exam

***what I am wondering is how many labs are in the pool of labs….and how many do i actually need to type and run commands in rather than stare at output****

Hi all. I booked my exam on Feb 21. Please share the latest IP Helper dump or other latest good dump. Thank you. fenimour dot smith at gmail dot com

@Anonymous. You are correct, those are the only possible labs in the exam. The first ones you mentioned required your input, the seconds require you to look and answer a multiple choices questions.