Share your SWITCH v2.0 Experience
February 7th, 2015
Go to comments
Note: The last day to take this SWITCH 300-115 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
Please share with us your materials, the way you learned, your feeling and experience after taking the SWITCH v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
What is the total number of questions in Premium Dumps including lab,MCQ ,Drag and drop etc
passed 8**
lacp stp, hsrp, vtpv3 (all these Sims are easy)
2 D&D
for me there was 7-9 new questions
here’s one:
what are two accounting types for AAA?
a. privileged
b. authentication
c. authorization
d. system
e. command
good luck all.
willing to share switch notes and dumps for route notes/dumps. route is my last exam.
Could anyone share the DND question?
How does the “LACP with STP Simulator” look like in the real exam? Will it be in the command line interface setup or does it look like in the dumps which have the fields to fill-in?
Took the exam yesterday. Passed with 9XX score.
LACP/STP, HSRP, VTP sims
For VTP sim answered according to this website.
All other questions are here except for 2-3 new questions, which you should be able to answer if you have studied the course content.
Good evening Remote. Please share 591Lab dumps. I will be writing the Switch exam on Monday.
my email is nixonbrown12 at gmail dot com
Patiently waiting for the dumps
Regards
Whats this 591q thats going around? does anyone have it and can share?
Can someone share the 591q dump version? I am taking my exam on Monday, please.
3. Which two statements about source port monitoring in a SPAN are true? (Choose two.)
A. Traffic through a destination port can be copied and included in the SPAN session.
B. The entire EtherChannel must be monitored.
C. It can monitor only FastEthernet and GigabitEthernet port types.
D. It can monitor individual interfaces within a port channel.
E. It can monitor ingress and egress traffic.
4. A switch has been configured with the vlan dot1q tag native command. Which statement describes what the switch does with untagged frames that it receive?
A. Untagged frames are forwarded via the default VLAN
B. It drops the untagged frames
C. The trunked port is put in err-disable state
D. Untagged frames arcde forwarded via the native VLAN
5. Which two operational attributes can be checked for EtherChannel ports that are in err-disabled state?
A. Port mode B. Port cost C. Duplex D. DTP E. VLAN
@Anonymous
3. Which two statements about source port monitoring in a SPAN are true? (Choose two.)
A. Traffic through a destination port can be copied and included in the SPAN session.
B. The entire EtherChannel must be monitored.
C. It can monitor only FastEthernet and GigabitEthernet port types.
D. It can monitor individual interfaces within a port channel.
Ans AD
4. A switch has been configured with the vlan dot1q tag native command. Which statement describes what the switch does with untagged frames that it receive?
A. Untagged frames are forwarded via the default VLAN
B. It drops the untagged frames
C. The trunked port is put in err-disable state
D. Untagged frames arcde forwarded via the native VLAN
Ans B
5. Which two operational attributes can be checked for EtherChannel ports that are in err-disabled state?
A. Port mode B. Port cost C. Duplex D. DTP E. VLAN
Ans AE
Which three commands configure RSPAN to capture outgoing traffice one VLAN on an interface while ignoring other VLAN traffic on the same interface ? (Chose three)
A. monitor session 2 source interface gigabitethernet 0/3 tx
B. monitor session 2 destination remote vlan 912
C. monitor session 2 source interface gigabitethernet 0/3 both
D. monitor session 2 destination interface gigabitethernet 1/0/2
E. monitor session 2 filter vlan 2-7, 12
F. monitor session 2 source interface gigabitethernet 0/3 rx
what is the true answer guys ?
Which two statements about isolated private VLAN ports are true? (Choose two)
A. They can communicate only with promiscuous ports.
B. They can be configured on the EtherChannel ports.
C. They can be configured on only port on a device.
D. They can be configured on more than one port in the same VLAN.
E. They can be communicate only with other ports in the private VLAN.
Which two commands must you use to configured an interface to send traffic from non-default native VLAN across a link that supports all VLANs? (Choose two)
A. Switchport access vlan 90
B. Encapsulation dot1Q 90 native
C. Switchport trunk native vlan 90
D. Switchport mode trunk
E. Switchport access vlan 1
Question about the difference between RSPAN and SPAN
A. Monitor port
B. access port
C. forwarding Port
D. destination port
Which one is true answer ?
Has anyone took exam today? What were the sims/dnd?
lab and sim
New Updated Questions Part 6 ,7 and 8 can pass the switch exam ?
SIMS HSRP / VTP3 / VTP LACP actual for today. D&D ( stackwise vs VSS) and HSRP vs VVRP
Passed today with 86x, SIMS HSRP/VTP3/VTP LACP. DND HSRP/VRRP, stackwise/vss (“uses 10Gbps interfaces” answer is reworded). Some new question, a lot of question from NUQ 6-8.
Studied Switch book, CBT nuggets, dumps.
Hi guys, can anybody share the HSRP vs VRRP D&D? Thank you!
D&D: HSRP vs VRRP
Answer:
HSRP>
– requires a unique IP address to use as the virtual IP Address
– uses multicast address 244.0.0102
– uses a virtual MAC address that begin with 0000.0C9F.F000
VRRP>
– uses ip protocol 112
– uses Physical IP address of the interface as the virtual IP address
– tracks the reachability of an IP address
what are two accounting types for AAA?
a. privileged
b. authentication
c. authorization
d. system
e. command
what is the right answer?
what are two accounting types for AAA?
a. privileged
b. authentication
c. authorization
d. system
e. command
DE
Network
EXEC
Command
System
Connection
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/xe-3s/sec-usr-aaa-xe-3s-book/sec-cfg-accountg.html
Passed 9xx/1000.
No new question.
All questions from here.
Labs: LACP, HSRP and VTP3.
LACP lab: Ping from switch B to switch A int vlan if its configured to verify connectivity. I had to create port-channel 1 interface.
Good Luck Everyone !!!
Thank you Certprepare !!!
@passedtoday
Could you give more details on lacp lab? And configuring the trunk ?On po1 or physical?
hello
Hi everyone, I passed the CCNP SWITCH 300-115 exam on the 16th of this month with a score of 8XX. I did a .vce with approximately 337 questions, where I had a lot of work researching the explanations straight from the CISCO material, and I am selling this .vce, I will sell a maximum of 30 for 10 dollars. Why am I selling and why only 30? Just because of the work I did and because I need money for the next exams. I am finishing taking the .vce for the CCNP ROUTE 300-101 exam in which I am studying, I will also sell a maximum of 30 for 10 dollars. If anyone is interested just say the e-m-a-i-l.
@lacp lab
lacp lab i configured everything that is listed here on certprepare. Switch B vlan 1 interface was already configured. I configured Po1 on both SW A and B.
Hi everyone. The dump I am using to study has two slightly different questions with different answers. Could someone please confirm the correct answers? Thank you.
1- What will be the behavior of an access port when a tagged packet is received with a VLAN ID of an access port?
A. Not Available
B. tag is removed and packet is forwarded to the VLAN mentioned in the tag
C. packet is dropped
D. tag is removed and packet is forwarded on the VLAN of the access port
Correct Answer: D?
2- What is the behavior of an access port when a tagged packet is received other than the access VLAN value.
A. Tag is removed and packet is forwarded of the VLAN mentioned in the tag.
B. tag is removed and packet is forwarded on the VLAN of the access port
C. Not Available
D. packet is dropped
Correct Answer: D?
The correct answer for this question is “packet is dropped”.
My bad, for both of these questions, “D” is the correct answer. You are correct.
Hi everyone, I successfuly pass my examen today with 9xx. Thanks Certprepare, A 90% aprox of all exam is here.
Maybe 4 new questions, but is very easy.
For example:
Which command is use for display the VLAN’s configurate in VTP SERVER MODE.
– Show running config
– Show vlan
I choose sh vlan.
The Lab’s were HSRP simulator, VTPV3 simulator, LACP with STP simulator.
PD: My english is bad because I talk spanish. Sorry for my english.
Good Luck!!!
Thank you very much for the confirmation! I appreciate the help!