Share your SWITCH v2.0 Experience

Are these the questions you have seen with the exam?

Kr,

Could you please share the premium & china dump here

Rick Question was very helpful. I found almost 20 q out of 35. If you study all qA of premium then no need to study other dump. but its huge that why I only study new 6,7, 8 and DD, Lab and 591Lab dump.

I can’t share china 591Lab dump. because I found it from other person.Thanks

dear guys

how i know i implement the LACP lab correct in the exam.

because i ping from switch B to Internet and was pingable but unfortunately i didn’t pass.
please let me know how i know my mistake in the exam

Can you write which options and answers you choosed for the labs? Maybe you failed on the Qs and not the labs?

@ BLACK
can i pass router exam if i study 3 weeks? please advise

I passed switching today
marks 8XXXX

I can provide good document if you need
ping me
remotelap1 AT gmail .com

I have 591Lab dump and others

i will share for free
if you have route- premium it will be great.

remotelap1 AT gmail . com

@Black, so the chinese dump only contains 65 questions?

I have found that these questions have different answers on recent dumps and people here in the chat.

Let check them! Are these correct or wrong? And why?

3. Which two statements about source port monitoring in a SPAN are true? (Choose two.)
A. Traffic through a destination port can be copied and included in the SPAN session.
B. The entire EtherChannel must be monitored.
C. It can monitor only FastEthernet and GigabitEthernet port types.
D. It can monitor individual interfaces within a port channel.
E. It can monitor ingress and egress traffic.
Ans: D , E ??

5. Which two operational attributes can be checked for EtherChannel ports that are in err-disabled state?
A. Port mode
B. Port cost
C. Duplex
D. DTP
E. VLAN
Ans: C , E ??

14. How many AVGs can be elected by GLBP member?
A. 1
B. 2
C. 4
D. 6
Ans: A or C ?

20. Refer to the exhibit. A single server in Company 123 is connected via EtherChannel to a single upstream switch. Which EtherChannel load balancing method on the switch makes optimal use of the redundant links as traffic flows from the routers to the server?
A. source MAC address
B. source IP address
C. source and destination MAC address
D. destination MAC address
Ans: A ?

21. Which command enables root guard on a Cisco switch?
A. Switch(config)#spanning-tree guard root
B. Switch(config)#spanning-tree root guard
C. Switch(config-if)#spanning-tree guard-root
D. Switch(config-if)#spanning-tree guard root
E. Switch(config-if)#spanning-tree root guard
Ans: A ?

25. Which command do you enter on a device so that users are automatically placed in enable mode after they authenticate with TACACS+?
A. aaa authorization exec default group tacacs+ if-authenticated
B. aaa authorization exec default group tacacs+ local-case
C. aaa authorization exec default group tacacs+ enable
D. aaa authentication exec default group tacacs+ if-authenticated
Ans: D ?

Same here answers. After i finish i was bale to ping from switch B to Router. So i thoght this is the correct answer. How i know if implement the lab correct or not

What is the correct answer ? I feel like these answers are wrong. I got this from a paid dump.

Which information in a RADIUS access-request packet is encrypted?
A. username and password
B. entire header
C. entire payload
D. password
Answer: A

You are configuration an interface, and you want to enable Layer 3 mode on an EtherChannel. Which task
must you perform?
A. Issue the no switch command.
B. Set the channel group to desirable.
C. Set the channel group to active
D. Issue the address command.
Answer: C

Which two reasons to deploy UDLD on a switch are true? (Choose two.)
A. It can prevent forwarding loops that result from unidirectional links
B. It can replace Cisco Discovery Protocol. C. lt can interact with Layer 1 mechanisms to monitor the status of physical links
D. It can interact with Layer 2 mechanisms to monitor the status of physical links
E. It can replace spanning tree.
Answer: CE

Q1 : D
Q2 : A
Q3 : A and C

3. Which two statements about source port monitoring in a SPAN are true? (Choose two.)
A. Traffic through a destination port can be copied and included in the SPAN session.
B. The entire EtherChannel must be monitored.
C. It can monitor only FastEthernet and GigabitEthernet port types.
D. It can monitor individual interfaces within a port channel.
E. It can monitor ingress and egress traffic.

Ans should be B & E

BASIC CHARACTERISTICS AND LIMITATIONS OF SOURCE PORT
A source port has the following characteristics:

It can be any port type such as EtherChannel, Fast Ethernet, Gigabit Ethernet and so forth.
It can be monitored in multiple SPAN sessions.
It cannot be a destination port (that’s where the packet analyser is connected)
Each source port can be configured with a direction (ingress, egress, or both) to monitor. For EtherChannel sources, the monitored direction applies to all physical ports in the group.
Source ports can be in the same or different VLANs.
For VLAN SPAN sources, all active ports in the source VLAN are included as source ports.

Could anyone share DND new questions?

20. Refer to the exhibit. A single server in Company 123 is connected via EtherChannel to a single upstream switch. Which EtherChannel load balancing method on the switch makes optimal use of the redundant links as traffic flows from the routers to the server?
A. source MAC address
B. source IP address
C. source and destination MAC address
D. destination MAC address
Ans: A ?

21. Which command enables root guard on a Cisco switch?
A. Switch(config)#spanning-tree guard root
B. Switch(config)#spaknning-tree root guard
C. Switch(config-if)#spanning-tree guard-root
D. Switch(config-if)#spanning-tree guard root
E. Switch(config-if)#spanning-tree root guard
Ans: A ?

The paid dumps service team says there answers are correct.

Have you taken the exam and encountered these questions ?

There is so much confusion when studying here and paid dumps. Cant tell who is correct.

did my switch today and one thing i noticed was that in lacp stp sim was that SWA had VTP mode as server (not transparent). Just one to watch out for.

@Laga, Congratulations

Once I go through MCQ under “SWITCH 300-115”, Do I need to repeat familiarizing “SWITCH 300-115” again and again? or shall I focus on the “SWITCHv2 – Composite Quizzes”? Please do help to advise.

May I also know how many D&D did you encounter?

Thank you!

In the dumps the answer is D here, but only see A as the correct answer? Am I wrong?

25. Which command do you enter on a device so that users are automatically placed in enable mode after they authenticate with TACACS+?

A. aaa authorization exec default group tacacs+ if-authenticated
B. aaa authorization exec default group tacacs+ local-case
C. aaa authorization exec default group tacacs+ enable
D. aaa authentication exec default group tacacs+ if-authenticated

Ans: D ??

Can somebody share HSRP vs VRRP drag and drop?

I think A is the correct answer too. Not D.

A. aaa authorization exec default group tacacs+ if-authenticated

Please, anybody else could share the answer ?

6. Which command do you enter to enable Dynamic ARP Inspection for VLAN 15?
A. SW1(config-vlan)# ip arp inspection vlan 15
B. SW1(config-vlan)# ip arp inspection trust
C. SW1(config-if)# ip arp-inspection trust
D. SW1(config)# ip arp inspection vlan 15
Ans: A
Correct Answer: D

7. Which two statements are true about port security? (Choose two)
A. It is used on EtherChannel bundle.
B. It must be used on the switch interface.
C. It can be configured for SPAN.
D. It is configured on an access port.
E. ?

Ans :
Correct Answer: B D

14. How many AVGs can be elected by GLBP member?
A. 1
B. 2
C. 4
D. 6
Ans: 4 or 1
Correct Answer: A

17. Which two commands display the VLANs that are present in the VLAN database? (Choose two.)
A. show running-config
B. show vlan database
C. show vlan brief
D. show vlan
E. show vlan id
Ans: B, D
Correct Answer: C D

21. Which command enables root guard on a Cisco switch?
A. Switch(config)#spanning-tree guard root
B. Switch(config)#spanning-tree root guard
C. Switch(config-if)#spanning-tree guard-root
D. Switch(config-if)#spanning-tree guard root
E. Switch(config-if)#spanning-tree root guard
Ans: A
Correct Answer: D

24. Which type of failure has occurred, if a link fails and the MEC successfully redistributes the load among the remaining operational links?
A. multiple MEC link failure
B. standby switch failure
C. active switch failure
D. single MEC link failure
Correct Answer: D

27. What is the value of the TPID/tag protocol identifier in dot1q?
A. 0x8100
B. 0x8a88
C. 0x8b45
D. 0x8200
Ans: B
Correct Answer: A

34. You want to correctly configure IP Source Guard on a switch. Which two tasks must you perform? (Choose two.)
A. Enable DHCP snooping on the switch.
B. Enable DHCP packet validation on the device.
C. Configure the DHCP snooping relay.
D. Enable DHCP option 82.
E. Configure the ip verify source vlan dhcp-snooping command.
Ans: D, E
Correct Answer: A E

0x8100

25. Which command do you enter on a device so that users are automatically placed in enable mode after they authenticate with TACACS+?

A. aaa authorization exec default group tacacs+ if-authenticated
B. aaa authorization exec default group tacacs+ local-case
C. aaa authorization exec default group tacacs+ enable
D. aaa authentication exec default group tacacs+ if-authenticated

I think A is the correct answer too. Not D.

A. aaa authorization exec default group tacacs+ if-authenticated

Please, anybody else could share the answer for this question ?

Thanks for the corrected answer, I sat and googled them all yesterday and got the same results. So it feels safe! Ony the AAA authorization question I’m thinking about, but I still think is Ans: A

@AAA Authorization

answer will be A ,,,because in question clearly mention after the user authenticate with TACACs+..so that that means after authenticate an user to the system next comes authorization..
hope it will helps

I did exam yesterday and remember a question asking the purpose of LACP port priorities (choose 2)

hello

what are the experiences of new test takers. I am looking for suggestions as my exam is in couple of days, any suggestion would be great!!!

sims yesterday were lacp/stp vtp and hsrp(not hotspot). I also remember a uestion asking something like: what is encrypted with radius 1.whole packet,just header, password, user name + password

also this
What are three types of RADIUS server responses? (Choose three)
A. Accept
B. Reject
C. Challenge
D. Get Password
E. Cancel

also Which effect of the line keyword entered at the end of an AAA method list is true?
A. It sets last resort failback authentication method.
B. It override the enable authentication method.
C. It override the radius authentication method.
D. It override the tacacs+ authentication method.