Share your ENSDWI Experience

Anyone has a valid dump??

Please share

Hi All,
I want to start my ENSDWI 300-415. Just want to know, is there any simulation come to the exam or its only multiple choice? Also, If I want prepare for the exam, where should i will start from? Please guide me?

With regards,
DMP

Hi All,
Anyone will be able to Answer my last query. It will be do it, If you will do it.

correction
Hi All,
Anyone will be able to Answer my last query. It will be great, If you will do it.

I want to start my ENSDWI 300-415. Just want to know, is there any simulation come to the exam or its only multiple choice? Also, If I want prepare for the exam, where should i will start from? Please guide me?

please can anyone know new exam questions that are not covered in premium

I took the exam today and I fail, there are about 20 new questions that were not included here

@certprepare

When do you update the dumps?

yesterday I pass the exam, I confirm that these are the new questions

1. Organisation name mismatch in vmanage and vbond.

2. Organisation error code displayed in “show control connection.

3. On which Queue voice traffic is matched

4. To establish reachability between Vedge and controllers in the data center which protocol is used === TLS / IGP / OMP

5. how to change the AD of IBGP to 20

6. Automatic on boarding of vedge process flow

7. What is the Enterprise root CA server

8. Qs on centralised control and centralised data policy navigation in GUI

9. two companies merged update certificate using open ssl and add enterprise ca

10. Config to add 1M shaper to the interface

11. Control policy config to route leaking between vpn 73 and vpn 50.

12. Parameters vedge validated during on boarding.
@certprepare thanks you are the best !

Thanks a lot for your input, qqq. I hope that CertPrepare updates their Q&A file soon.

@qqq congrats!!!
What dumps you use to cert? Certprepare is still valid or update?

@Cerprepare – has the exam Q&A’s been updated with the new 15 questions

Anyone has a valid dump to share.?????

Hi could someone please share a valid dump??

Here are some of the latest dumps:

– Refer to the exhibit. Which configuration value is used to change the administrative distance of iBGP routes to 20? Configure Local Distance to 20

– What is a requirement for a WAN Edge to reach vManage, vBond, and vSmart controllers in a data center? IGP

– Which third-party Enterprise CA server must be used for a cloud-based vSmart controller? RootCert

Hit me up for more…

Hi Anonymous_7 could you share the dump?

planing to do exam tomorrow, any new questions guys

Come on guys whats going on before we shared the dump now is hard to get stuff even in certcollection

What is the behavior of vBond Orchestrator?
A. It maintains vSmart and WAN Edge routers secure connectivity state.
B. It build permanent connections with vSmart controllers.
C. It updates vSmart of WAN Edge routers behind NAT devices using OMP.
C. It build permanent connections with WAN Edge routers.

???

What is the behavior of vBond Orchestrator?
A. It maintains vSmart and WAN Edge routers secure connectivity state.
B. It build permanent connections with vSmart controllers.
C. It updates vSmart of WAN Edge routers behind NAT devices using OMP.
D. It build permanent connections with WAN Edge routers.

???

– Refer to the exhibit. Which configuration value is used to change the administrative distance of iBGP routes to20?
A.ConfigureinternalRoutesDistanceto20
B.ConfigurePropagateASPathtooff
C.ConfigureLocalDistanceto20
D.ConfigureExternalroutesdistance20
Answer:C

– What is a requirement for a WAN Edge to reach vManage, vBond, and vSmart controllers in a data
center?
A.IGP
B.QoS
C.TLS
D.OMP
Answer:A

Refer to the exhibit vManage and vBond have an issue establishing a connection with each other. Which action resolves the issue?
A.ReconfigurethesystemIPstobelongtothesamesubnet
B.Change the organization name on both controllers to match vipteta.com.
C.RemovetheencapsulationipseccommandunderthetunnelinterfaceofvBond
D.ConfiguretheencapsulationipseccommandunderthetunnelinterfaceonvManage
Answer:B

RefertotheexhibitWhichcommandallowstrafficthroughtheIPsectunnelconfiguredinVPN0?
A.servicelocal
B.serviceFWaddress1.1.1.1
C.servicenetsvc1vpn1
D.servicenetsvc1address1.1.1.1
Answer:D

Refer to the exhibit An engineer is getting a CTORGNMMIS error on a controller connection Which
actionresolvesthisissue?
A.ConfigureavalidserialnumberontheWANEdge
B.Configureavalidorganizationname
C.ConfigureavalidcertificateonvSMART
D.ConfigureavalidproductID
Answer:B

Which routing protocol is used to exchange control plane information between vSmart controllers andWANEdgeroutersintheCiscoSD-WANsecureextensiblenetwork?
A.BGP
B.OSPF
C.BFD
D.OMP
Answer:D

HowismulticastroutingenabledondevicesintheCiscoSD-WANoverlaynetwork?
A. The WAN Edge routers originate multicast service routes to the vSmart controller via OMP, which
then forwards joins for requested multicast groups based on IGMP v1 or v2 toward the source or
PIM-RPasspecifiedmtheoriginalPIMjoinmessage.
B. ThevSmartcontrolleroriginatesmulticastserviceroutes totheWAN EdgeroutersviaOMP, which
thenforwardsjoinsforrequestedmulticastgroupscasedonIGMPv1orv2towardthesourceorPlMRPasspecifiedmtheoriginalPIMjoinmessageC. ThevSmartcontrolleroriginatesmulticastserviceroutes totheWAN EdgeroutersviaOMP, whichthen forwards joins (or requested multicast groups based on IGMP v2 or v3 toward the source orPIM-RPasspecifiedintheoriginalPIMjoinmessageQuestions&AnswersPDF Page97
https://www.certshero.com
D. The WAN Edge routers originate multicast service routes to the vSmart controller via OMP. which
then forwards joins for requested multicast groups based on iGMP v2 or v3 toward the source or
PIM-RPasspecifiedintheoriginalPIMjoinmessage
Answer:A

An engineer must use data prefixes to configure centralized data policies using the vManage policy
configurationwizard.Whatisthefirststeptoaccomplishthistask?
A.Creategroupsofinterest
B.Configurenetworktopology.
C.Configuretrafficrules.
D.ApplypoliciestositesandVPNs.
Answer:A

Refertotheexhibit. A networkadministrator issetting thequeueing valueforvoice trafficforone of
theWANEdgeroutersusingvManagerGUI.Whichqueuevaluemustbesettoaccomplishthistask?
A.0
B.1
C.2
D.3
Answer:A

Refer to the exhibit The Cisco SD-WAN network is configured with a default full-mesh topology.
Islamabad HQ and Islamabad WAN Edges must be used as the hub sites. Hub sites MPLS TLOC must
be preferred when forwarding FTP traffic based on a configured SLA class list. Which policy
configuration does the network engineer use to call the SLA class and set the preferred color to
MPLS?
A.LocalizedPolicy,RoutePolicy
B.CentralizedPolicy,TrafficPolicy
C.LocalizedPolicy,ForwardingClass
D.CentralizedPolicyTopology
Answer:B

Whichsetofelementsareverifiedbythecontrollertoconfirmtheidentityofedgedevices?
A.certificates,organizationnameandserialnumberofthedevice
B.organizationnameserialnumberandsystemIPofthedevice
C.certificates,organizationname,andvBonddomain
D.certificates,systemIP,andvBonddomain
Answer:A

THANK ME LATER!!! :D

Hey Crack,

Thank a lot for the update.

This will realy help us much.

Good luck to all of u !!

Greetings…

483. What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware?
 A. The traffic uses the default MDT to transmit the data only if it isa (S,G) multicast route entry
 B. A data MDT is created to if it is a (*, G) multicast route entries
 C. A data and default MDT are created to flood the multicast stream out of all PIM-SM neighbors.
 D. A data MDT is created to allow for the best transmission through the core for (S, G) multicast route entries.
Correct Answer: D
484. AN engineer is implementing MPLS OAM to monitor traffic within the MPLS domain. Which action must the engineer perform to prevent from being forwarded beyond the service provider domain when the LSP is down?
 A. Disable IP redirdects only on outbound interfaces
 B. Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network
 C. Disable IP redirects on all ingress interfaces
 D. Configure a private IP address as the destination address of the headend router of Cisco MPLS TE.
Correct Answer: B

c:

I have found these 5 questions and Im including the answers:
An engineer is adding a tenant with location ID 399533345 in vManage. What is the maximum number of alphanumeric characters that is accepted in the tenant name filed?
A 64
B 128 >>>>>>
C 256
D 8
What are the two protocols redistributed into OMP?
A OSPF >>>>
B RIP
C LDP
D RSVP
E EIGRP >>>>
An organization wants to use the cisco SD-WAN regionalized service-chaining feature to optimize cost and user experience with application in the network, which allows branch routers to analyze and steer traffic toward the required network function. Which feature meets this requirement?
A Cloud Services Platform
b. VNF Service Chaning
C Cloud onRamp for Colocation >>>>>
D Cloud onRamp for laaS
Which two prerequisites must be met before the Cloud onRamp for laaS is initiated on vManage to expand to the AWS cloud? (Choose two)
A Attach the *AmazonCreateVPC* and ‘Amazon Provision EC2’ permission policy to the IAM account
B Subscribe to the SD-WAN Edge router AMI in the AWS account >>>>>
C Attach an OSPF feature template to the AWS cloud Edge router template
D Attach a device template to the cloud WAN Edge router to be deployed in the AWS >>>>
E Preprovision the transit VPC in the AWS region
A customer must upgrade the cisco SD-WAN devices and controllers from version 19.2 to version 20.3. The devices include WAN Edge cloud, vManage, vSmart, and vBond. Which types of image types of image files are needed for this upgrade?
A one file for vManage and one file for all other devices with extension tar.gz
B one file for vManage, one for vSmart and one for vBond + WAN Edge Cloud with extension.bin
C one file for vManage, one for vSmart and one for vBond + WAN Edge Cloud with extension tar.gz >>>>>>>>>>>>>>>
D one file for vManaga and one file for all other devices with extension .bin

still i am confused; if i take this exam 300-415 do my CCNP Enterprise will get renewed without taking any extra exam?

@CCNPW, you have to take two of the 300-x concentration exams to renew or one 350-x (profess. core) exams to renew.

Question 1:
DRAG DROP

Drag and drop the correct commands from the right onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all commands are used.

Correct Answer :

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html

Question 2:
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?

Question 3:

Refer to the exhibit. The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?

https://payhip.com/b/U9q4

Question 4:
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?

Just passed the exam. All questions came from the Premium section, no new questions. You could find those questions in the comments for free though. Just keep in mind that you have to double-check the answers because some are wrong!

What is the passing score ?

I passed my exam today 8-11, Thanks @Certprepare all questions including the new questions were in the exam.

Has the premium been updated now then ?